Injection unit
Cylinder head volume(cm3): 179, 221, 226
Shot weight(g): 163, 201, 233
Screw diameter(mm): 36, 40, 43
Injection pressure(Mpa): 222, 180, 156
Rate of injection(PS)(g/s): 84, 104, 120
Screw speed(rpm): 200
Screw length/diameter ratio(L/D): 23.3, 21, 19.5
Clamping unit
Clamping force(KN): 1280
Max mould opening stroke(mm): 400
Distance between the tie bars(mm): 410*410
Allowed mould thickness(mm): 150-450
Ejection force(KN): 38
Ejection stroke(mm): 100
Dia of mould location hole(mm): 125H7
Sphere diameter of spray nozzle(mm): SR10
Heating capacity of screw cylinder(KW): 7.75
Pump motor power(KW): 13
Oil tank capacity(L): 190
Rated pressure of oil pump(Mpa): 16
Machine dimensions(m): 4.58*1.23*2.01
Machine weight(t): 4.0